AIAIAI TMA-1 TMA-2 Replacement Ear Pads — Black Leather

About this pair

AIAIAI TMA-1 TMA-2 replacement ear pads (TMA-1 TMA-2 earpads). Black Leather ships as a matching pair. Once the leather-look skin starts flaking or the foam collapses, the closed-cup isolation drops, the bass thins out and long sets get uncomfortable. Replacing worn AIAIAI TMA-1 TMA-2 ear pads with this black pair brings the seal back without touching the headband, speakers or cable.

Which TMA models this pair covers

The listing names TMA-1 Studio, TMA-1 DJ and TMA-2, so stick to those models and compare the worn pad before ordering. On TMA-2 DJ builds, check the baffle style of your cup, because the modular system allows different speaker and pad combinations. There is a second black leather-look TMA-1 / TMA-2 listing in the catalogue,; both are similar in colour and surface, so if you need an exact match compare thickness and ring shape against the pad you are replacing. This pair is aftermarket, not a factory AIAIAI spare.

Smooth leather look for booth and studio

The surface is a smooth leather look with an easy-clean finish. That matters in a DJ booth, where heat and club-night sweat soak into fabric quickly, and in a studio, where the same pair gets worn for hours. The dark, wipe-clean over-ear pad face keeps a tidy appearance under stage lights and low-visibility black blends into the matte TMA look. If you prefer a softer feel, velvet TMA pads are the usual alternative; black leather-look is the choice when isolation and easy cleaning come first.

How to fit them

Fitting is a typical DIY swap. Pull the worn cushion off the cup, then stretch the new black pad over the cup ring, working around the edge until the lip sits evenly with no gaps. Repeat on the other side and check that both pads face the same way. No tools are needed. Take a moment to compare the new pad with the old one before throwing it away: same ring, same diameter, same seating depth means you picked the right pair.

When to replace TMA pads

Replace the pads when the leather-look skin flakes, cracks at the edge, or when the foam no longer springs back. A flaking black OEM refresh is not only about looks: fresh pads restore a cleaner seal, which gives you more reliable monitoring for beatmatching in a loud room and a more consistent low end for studio work. Because the pads ship as a matching pair, left and right stay even. Keeping a spare kit in the headphone bag also means a torn pad never ends a gig early.

Why black leather-look on a TMA

The TMA line has always been about a matte black, tool-like look, and aftermarket black TMA covers keep that appearance intact instead of adding a contrasting colour. Leather-look pads also isolate well, which is exactly what you want when the monitor speakers and the club system are loud and you need to hear the cue clearly. They are easy to wipe after a night in a hot booth and hold their shape between gigs. For producers who switch between mixing and DJing with the same pair, a single durable surface that cleans in seconds is simply practical.

Order the AIAIAI TMA-1 TMA-2 Replacement Ear Pads in black leather-look, stretch them on in minutes, and get your TMA headphones back to a tight, comfortable seal. Every order ships across the US.